Skip to main content


Kitronik Terminal Block Breakout for BBC Micro:bit - No Micro:Bit

Kitronik Terminal Block Breakout for BBC Micro:bit

$17.15 - $46.15

Kitronik Terminal Block Breakout for BBC Micro:bit - No Micro:Bit
1 $17.15
10 $16.29
25 $15.44


The Kitronik Terminal Block Breakout Board for BBC Micro:bit breaks out all the signal and power pins to user-friendly terminal blocks. There will be no more untangling M/M or M/F jumper cables with this terminal block. Simply cut a length of wire from one of your spools, strip off some shielding, and screw it into place.

This Kitronik Terminal Block Breakout Board features a terminal block breakout point for each BBC micro:bit IO pin, a switch-controlled input power terminal block, two output power terminal blocks (fed through power from the switched input) and also Link compatible connections for other BBC micro:bit accessory boards.

The input terminal block serves as a power supply. The board has no voltage regulator or overvoltage protection, so the supply voltage MUST NOT exceed the rated supply of 3.3V for the BBC micro:bit.


If the micro:bit is powered via its USB connector, there is no power at the 3.3V terminal block output connections. Thus providing some overcurrent protection for the BBC micro:bit.

To use the Terminal Breakout board, firmly insert the micro:bit into the edge connector in the center of the board. The BBC micro:bit can face in either direction and all the terminal blocks will be fully functional.

Requires: 1 x BBC micro:bit and a terminal block screwdriver.

BBC Micro:Bit available as an optional extra.


  • It breaks out all of the signal and power pins on the microbit to user-friendly terminal blocks
  • Build permanent circuits that you move without worrying about jumper wires becoming detached
  • There is also built-in overcurrent protection using the USB connection to transfer data to the microbit
  • It features a switch-controlled power block and two output power terminal blocks
  • The microbit connects to the board via an edge connector that the microbit slots directly into, either way around
  • The board complies to the Link Standard that all Kitronik branded microbit accessories conform to



80 mm


50 mm

PCB Thickness

1.6 mm

Full Range

Add Micro:Bit? Product Code
No Micro:Bit KT5651
With Micro:Bit (board only) KT5651 + MB-0040


You Might Also Like

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.

We use cookies to ensure you have the best experience on our site. If you continue to use this site you consent to the use of these cookies. OK

Find out more in our Privacy Policy