School Soldering Equipment: Stations, Solder & Accessories for 2027
November 20, 2026
School Soldering Equipment: Stations, Solder & Accessories for 2027
Before the Christmas break, check that your school’s electronics workbenches have everything needed for the new year. Replacement soldering stations may be the largest purchases, but missing tips, depleted solder reels and worn accessories can leave otherwise serviceable equipment underused.
At Wiltronics, our soldering range includes Weller, Doss and Micron stations, lead-free solder, desoldering tools, PCB holders and replacement filters. Reviewing these together helps your department prepare a complete purchasing list for 2027.
Start by separating three requirements: equipment that needs replacing, additional workstations needed across the department, and supplies that need replenishing.
Compare soldering stations for your workbenches
| Purchasing requirement | Product | Key features |
|---|---|---|
| Digital control for regularly used workbenches | Weller WE1010 70W Soldering Station | Temperature lock, password protection, standby and automatic setback |
| General-purpose station replacement | Doss ZD929C 48W Soldering Station | Adjustable temperature, digital display and set/read switch |
| Regular through-hole component removal | Micron ATT2052 Soldering and Vacuum Desoldering Station | Combined 60W soldering iron and 90W vacuum desoldering tool |
| Hot-air capability for a staff repair bench | JTS1648 2-in-1 Soldering and Rework Station | 60W soldering pencil and 300W hot-air blower |
Choose around the work each bench supports, then check the supplied accessories and compatible replacement parts.
Weller WE1010: controlled settings for shared benches
The Weller WE1010, SI2732, provides 70W of power and a listed temperature range of 100–450°C. It includes an ETA tip and accepts compatible Weller ET Series replacement tips.
Its temperature lock and password protection are useful features to compare when reviewing shared equipment. Standby and automatic setback add further control over operation between tasks. Include suitable spare tips when planning a group of replacement stations.
Doss ZD929C: review general soldering capacity
The Doss ZD929C, SI21929C, is a 48W station with a digital temperature display, set/read switch and listed adjustment range of 160–480°C.
Consider it when replacing general soldering positions or increasing the number of available stations. Record the model against each bench so future replacement-part orders can be matched accurately.
Micron ATT2052: support regular repair work
The Micron ATT2052 combines a 60W soldering iron with a 90W vacuum desoldering tool. The two functions can be switched independently, and separate stands with integrated tip cleaners are included.
This is an option for a staff or technician bench where through-hole components are regularly removed. Review replacement soldering tips, desoldering tips and maintenance requirements alongside the station purchase.
JTS1648: add hot-air rework capability
The JTS1648 2-in-1 station combines a 60W soldering pencil and a 300W hot-air blower, with dual digital displays and adjustable airflow.
Include it where the department has an established requirement for hot-air repair work. Vacuum desoldering and hot-air rework serve different purposes, so match the equipment to the repairs staff undertake.
Replenish solder before the shelves run empty
Our Lead Free Solder 250g uses a 99.3% tin and 0.7% copper alloy with a flux core. Two wire diameters are available:
| Solder | Product code | Pack size |
|---|---|---|
| 0.8 mm lead-free solder | SD1005 | 250 g reel |
| 1.2 mm lead-free solder | SD1015 | 250 g reel |
Record alloy, diameter and remaining quantity during the stocktake. Matching the department’s approved solder specification makes replenishment more reliable than ordering by reel size alone. Lead-free solder still requires appropriate fume controls and handling procedures.
Add the accessories that complete each workstation
| Item to review | Product | What to record |
|---|---|---|
| Board support | TL1980 Adjustable Desktop PCB Holder | Quantity and required board dimensions |
| Manual solder removal | SI3010 K&W Desolder Tool | Tool condition and replacement-tip needs |
| Desoldering consumables | Desoldering Wick, 1.5 m | Required width: 2 mm or 3 mm |
| Tip maintenance | SI5112 Tip Cleaner Paste, 20 g | Compatibility with the tip manufacturer’s care instructions |
| Local fume capture | FA2285 Solder Fume Extractor | Suitability for the bench’s fume-control arrangements |
| Replacement filters | FA2286 Filter Set of Three | Quantity needed for existing FA2285 units |
These products cover reusable equipment, consumables and maintenance supplies, so count each category separately.
PCB holders: restore complete working positions
The TL1980 Desktop PCB Holder provides adjustable board positioning, with rotation through 360° in 15° increments. Its listed maximum holding size is 200 × 140 mm.
Check holders alongside the soldering stations. A missing holder can leave a bench incomplete even when the iron, stand and solder are available. Match the holder to the board sizes your department uses.
Desoldering tools and wick: replenish both by function
The K&W Desolder Tool, SI3010, has a metal body, replaceable tip and construction that allows disassembly for cleaning. Check existing tools for maintenance needs before adding replacements.
Our 1.5 m desoldering wick is available in 2 mm width, SI3520, and 3 mm width, SI3510. Record the required width and remaining usable length when preparing the order.
Tip care and replacement filters: small items worth checking
The 20 g soldering tip cleaner paste, SI5112, combines cleaning and tinning functions. Check its use against the iron manufacturer’s maintenance instructions; it cannot repair a physically damaged tip.
For existing FA2285 extractors, include the matching FA2286 replacement filters in the stocktake. Assess new extractors within the school’s overall ventilation arrangements rather than assuming a desktop filter unit meets every bench’s requirements.
Frequently asked questions
What should we order alongside a new soldering station?
Check the included iron stand and cleaning accessories, then review compatible spare tips, approved solder, board support and suitable fume-control arrangements.
Which solder diameter should we replenish?
Match the diameter to the department’s established work and approved supplies. The featured lead-free solder is available in 0.8 mm and 1.2 mm diameters.
Are replacement tips interchangeable between stations?
Do not assume compatibility. Match the tip series and part number to the exact soldering iron.
Does every workstation need a powered desoldering station?
Base the purchase on frequency and type of repair work. A dedicated staff repair bench may be the appropriate location for powered vacuum desoldering equipment.
Should we replace equipment with missing accessories?
Identify the missing parts first. Compatible replacements may restore a serviceable station; suspected equipment faults need separate assessment.
Prepare complete workbenches for 2027
Use the final stocktake to bring major purchases and everyday supplies into one order. Replace unsuitable stations, add the repair capabilities your department needs, and replenish solder, tips, holders, wick and filters.
Explore our soldering equipment and accessories to prepare your electronics workbenches for the new school year.
© Electrotech Brands Pty Ltd 2026










Write a Comment
You must be logged in to post a comment.