Skip to main content

Menu

0 items

$0.00 AUD

Kitronik Inventors Kit for the BBC Micro:bit - Python version - No Micro:Bit
KT5669
Kitronik Inventors Kit for the BBC Micro:bit - Python version

$44.95 - $73.95

Kitronik Inventors Kit for the BBC Micro:bit - Python version - No Micro:Bit
QTYPrice
1 $44.95
10 $42.70
25 $40.46

Description

The Kitronik Inventors Kit for the BBC Micro:bit - Python version is an excellent way to get started with programming and hardware interaction with the BBC microbit. The kit contains everything you need to complete 10 experiments which include the use of LEDs, motors, photoresistors, and capacitors.

Also included is an easy-to-follow tutorial book that will guide you through everything you need to know about programming the BBC micro:bit. There is no need for any programming knowledge or experience as the tutorial book will guide you every step of the way.

The tutorial offers step-by-step guides to all 10 experiments.

  • Experiments 1 - 6 with MakeCode Blocks
  • Experiments 7 - 10 with MakeCode Python editor. The Python version tutorial booklet has been written especially for this version and will guide the user through the process of creating code and circuits. The original Inventor's kit experiments 7 - 10 used JavaScript.

The Kitronik Inventors Kit - Python version for the BBC microbit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. It is also easy to connect additional components to the BBC micro:bit by using the specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard.

This kit is available as a single pack or as a pack of 20 for the classroom.

Inventors Kit Notes:
  • This kit requires assembly.
  • The kit ships with a booklet with detailed instructions and diagrams for all 10 experiments.
  • Complete the experiments with the MakeCode Editor.
    • Experiments 1 - 6 with MakeCode Blocks.
    • Experiments 7 - 10 with MakeCode Python.
  • This kit does not include a BBC microbit.
  • If you purchase a microbit separately you may also need to purchase a Battery Cage and a USB Cable.

Requires:

  • BBC micro:bit
  • Phillips Screwdriver
  • Terminal Block Screwdriver
  • Micro USB Cable

Features

  • No soldering is required - build your first circuit in minutes
  • Make 10 experiments included in the provided step-by-step tutorial book

Included

1 x Mounting Plate

1 x Potentiometer - Vertical Type (finger adjust) 100K

1 x Finger Adjust Spindle

1 x Sticky Fixer for Battery Pack

1 x Small Prototype Breadboard

1 x Terminal Connector

4 x Push Switch

1 x Motor

1 x Transistor

2 x Red 5mm LED

2 x Orange 5mm LED

2 x Yellow 5mm LED

2 x Green 5mm LED

1 x RGB 5mm LED

1 x Fan Blade

5 x 2.2KΩ Resistor

5 x 10KΩ Resistor

5 x 47Ω Resistor

1 x Edge Connector Breakout Board for BBC micro:bit

10 x Male to Male Jumper Wires

10 x Male to Female Jumper Wires

1 x 470uF Electrolytic Capacitor

1 x Piezo Element Buzzer

2 x Pan Head M3 Machine Screw

1 x Phototransistor

Full Range

Add Micro:Bit? Product Code
No Micro:Bit KT5669
With Micro:Bit (board only) KT5669 + MB-0040

Resources

You Might Also Like

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.

We use cookies to ensure you have the best experience on our site. If you continue to use this site you consent to the use of these cookies. OK

Find out more in our Privacy Policy