Tri-State Quad D Flip-Flop (MM74C173N)
4076
$1.32
| QTY | Price |
|---|---|
| 1 | $1.32 |
| 10 | $1.19 |
| 25 | $0.95 |
Description
The MM74C173N Tri-State Quad D Flip-Flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The four D-type flip-flops operate synchronously from a common clock. The TRI-STATE output allows the device to be used in bus-organized systems.
The outputs are placed in the TRI-STATE mode when either of the two output disables pins are in the logic ‘‘1’’ level. The input disable allows the flip-flops to remain in their present states without disrupting the clock. If either of the two input disables are taken to a logic ‘‘1’’ level, the Q outputs are fed back to the inputs and in this manner, the flip-flops do not change state.
The clearing is enabled by taking the input to a logic ‘’1’’ level. Clocking occurs on the positive-going transition.
Applications include: automotive, data terminals, instrumentation, medical electronics, alarm systems, industrial electronics, remote metering, computers.
Features
- Supply voltage range 3V to 15V
- Tenth power TTL compatible Drive 2 LPTTL loads
- High noise immunity 0.45 VCC (typ.)
- Low power
- Medium speed operation
- High impedance TRI-STATE
- Input disable without gating the clock
Specifications
Pins
16
Operating Temperature
-40°C - 85°C
Nominal Supply Voltage
5.0 V
Minimum Supply Voltage
3.0 V
Maximum Supply Voltage
15.0 V
Dimensions
Length
19.305 mm
Width
7.62 mm
Terminal Pitch
2.54 mm
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.
Tri-State Quad D Flip-Flop (MM74C173N)
4076
$1.32
| QTY | Price |
|---|---|
| 1 | $1.32 |
| 10 | $1.19 |
| 25 | $0.95 |