Skip to main content

Menu

0.96 Inch 128x64 I2C Blue OLED Display Module Arduino Compatible

ARD2-1240
Photo of a 0.96 inch 128x64 character I2C blue OLED display module that is Arduino-compatible.

$16.95

QTYPrice
1 $16.95
5 $14.40

Description

This is an Arduino compatible 0.96 inch blue OLED Display Module with 128x64 resolution. It can be interfaced with any microcontroller using SPI/IIC protocols.

OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED posses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. Other OLEDs are also available.

Hardware Setup:

There are 4 pins on the OLED Display module with 128x64 resolution: GND, VCC, SCL, and SDA. Connect the OLED module to your breadboard. Get four male to male dupont jumper wires and connect to Arduino.

  • SDA → A4
  • SCL → A5
  • VCC → 3.3V
  • GND → GND

Using the ARD2-1240 with a UNO R3 and U8g2 Library Software:

U8g2 (Universal Graphics Library for 8 Bit Embedded Systems) is a graphics library with support for many different displays. Install U8g2.

Features

  • A simplified manufacturing process compared to TFT-LCD
  • Self-emitting light, in contrast to the required backlight for TFT-LCD
  • High luminosity
  • Lightweight and thin (less than 2mm)
  • Capable of wide vewing angles>160
  • Low operating voltage and power consumption – full screen lit 0.08W
  • Quick response (< second level)
  • Wide range of operating temperatures
  • Supports many control chip: fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
  • I2C/IIC interface – need 2 IO only

Specifications

Resolution

128x64

Viewing Angle

> 160 degree

Voltage

3V ~ 5V DC

Operating Temperature

-30 ~ 70°C

Driver IC

SSD1306

Character Colour

Blue

Dimensions

Length (mm)

27

Width (mm)

27

Height (mm)

4.1

You Might Also Like

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.

0.96 Inch 128x64 I2C Blue OLED Display Module Arduino Compatible

ARD2-1240

$16.95

QTYPrice
1 $16.95
5 $14.40

We use cookies to ensure you have the best experience on our site. If you continue to use this site you consent to the use of these cookies. OK

Find out more in our Privacy Policy