IEC Voltage Regulator Module 1.25 - 15VDC 1Amp
This IEC Voltage Regulator Module can be connected to any AC or DC power source and will convert the AC or unfiltered DC to a smooth, adjustable, metered and regulated output of 1.2 to 15V.DC at 1A for electronic studies. Input and output is via 4mm sockets. The small meter monitors output voltage. If the input voltage is low, the output may not achieve 20volts. For 20 volts output, an input of close to 14V.AC is required.
- Converts AC or unfiltered DC to a regulated output
- Small meter for monitoring output voltage
- The DC output is automatically protected by internal electronics. If the output current is exceeded, the output voltage will reduce automatically to protect the circuitry.
1.2 - 20VDC regulated at 1 Amp continuous
Better than 1% voltage fluctuation from no load to full load
Ripple and Noise
Better than 10mV ripple and noise at full load
137mm (L) x 75mm (W) x 65mm (H)
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.