RCD SAFETY SWITCH OUTLET RCDs (residual current devices), also commonly called safety switches, are designed to cut the power in a fraction of a second in the event of a fault condition, thereby preventing electrocution. The electrics in your house may be too old to have RCDs installed, or you might want to use a power tool outdoors on an outlet that doesn't have an RCD fitted - use this handy portable one instead. Note: RCDs are not a substitute for common sense around mains electricity. While they will work in most situations, they may not in some cases and are not a substitute for current overload devices such as fuses and circuit breakers. Wiring, appliances, leads and power outlets must always be maintained in a safe condition. *10A 240V rated
$24.95
Image
Code
Description
1 - 1
2 - 4
5+
Quantity
MEQP2000
POWER POINT & LEAKAGE TESTER Power Point and Leakage Tester *Test your power points using this versatile tester within 110V to 240V range for correct wiring and trip levels for earth leakage circuit breakers. *The combination of lights on the front panel identifies the following problems: * No Earth connected * No Neutral connected * No Active connected * Active and Neutral reversed * Active and Earth Reversed *To determine ELCB trip levels simply slide the switch from 10mA up toward 100mA. All ELCB's should trip before 100mA. Switch positions are 10 mA,15 mA,30 mA and 100 mA
