Skip to main content


Raspberry Pi 3 Model B+ STEM Coding Starter Pack

Photo of Raspberry Pi 3 Model B+ STEM Coding Starter Pack.


1 $159.00
10 $145.00


This Raspberry Pi 3 Model B+ STEM kit for beginner programmers and coders has a GPIO Expansion Board and breadboard, plus many components. The full list of components can be found below in the Included Lines section. This bundle is perfect for encouraging student interest in STEM subjects and programming - see ‘Physical Computing with Python’ below in the Resources section.


1 x RPi3-B+ : Raspberry Pi 3 Model B Computer

The Raspberry Pi 3 Model B+ boasts a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT. The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market. The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

1 x CM0094M-NOOBS : 16GB microSD Class 10 with NOOBS

A microSD HC card with 16GB of Class 10 flash memory, pre-installed with NOOBS for Raspberry Pi. NOOBS is ideal for beginners who want to quickly get a Raspberry Pi up and running with minimal mucking around.

1 x RPi3023RASP : Official Raspberry Pi 2/3 Enclosure

Protect your Raspberry Pi 2/3 or Raspberry Pi B+ with the stylish white and raspberry enclosure from Raspberry Pi. Manufactured from tough ABS plastic, the case is designed to survive every day use, as well as those rare occasions when accidents happen.

1 x PS1004-2.5 : Official Raspberry Pi 3 2.5A 5.1VDC PSU

This power supply unit (PSU) for the Raspberry Pi 3 is Pi Foundation approved. The power supply is an integrated 1.5m cable and microUSB plug. It supports up to 2.5A of current which is plenty to power devices through the four USB ports on the board.

1 x RPi3402 : 2.0m HDMI Cable

This high speed HDMI lead is 1.4 compliant and ideally suited for connecting your Raspberry Pi 3 Model B computer to any HDMI monitor or HDTV.

1 x RPi5202 : GPIO Expansion T-Board for Raspberry Pi 2/3/B+

This GPIO Expansion Board can bridge your Raspberry Pi 3's GPIO pins to a solderless breadboard for easy experimentation.

1 x MA4004 : 400 Hole Breadboard (300 + 2x50 Rails)

This solderless breadboard makes experimentation with electronics fun and easy. Perfect for the Pi 3's GPIO pins to be bridged to.

1 x RPi5204 : GPIO Cable 40-way for Raspberry Pi

The Raspberry Pi 3 features a 40-pin GPIO header. If you want to bridge those contacts out onto another PCB, you'll want this cable. It has 40 socket & wire sets.

1 x ARD2-2020 : Ultrasonic Distance Sensor Module HC-SR04

1 x SE0105 : Digital PIR Sensor

1 x MPB12C39A : Light Dependent Resistor LDR 5549 Photoresistor

1 x SW0520 : Tactile Switch SPST 6mm sq. 2mm Button

1 x AL3008 : Piezo Buzzer-PCB 12mm dia.

1 x LED-5MM/R : 5mm LED Red Diffused

1 x LED-5MM/G : 5mm LED Green Diffused

1 x LED-5MM/Y : 5mm LED Yellow Diffused

3 x RS1425 : 330R CR25 Carb Resistor

1 x RS1565 : 4K7 CR25 Carb Resistor

1 x CN3602 [0.25] : Jumper Connector Leads Male-Fem 200mm Rainbow (10 Pack)

1 x MCP3008-I/P Microchip A to D Converter


You Might Also Like

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.

Raspberry Pi 3 Model B+ STEM Coding Starter Pack



1 $159.00
10 $145.00

We use cookies to ensure you have the best experience on our site. If you continue to use this site you consent to the use of these cookies. OK

Find out more in our Privacy Policy