Skip to main content

Menu

EtherTen by Freetronics

ARD4216
EtherTen by Freetronics

$69.95

Out of Stock
QTYPrice
1 $69.95
5 $62.95

Description

Two tastes that taste great together: Arduino and Ethernet. But until now the only way to connect an Arduino to the Internet via a LAN was to add an Ethernet Shield. Wouldn't it be great if there was an Arduino-compatible board with on-board Ethernet? Better still, what if that board was based on the Freetronics Eleven and the Freetronics Ethernet Shield (with Power-over-Ethernet support!) but merged together into a single, integrated board that was 100% Arduino compatible and network-enabled.

This, folks, is what you've been waiting for:
The EtherTen is a 100% Arduino compatible board that can talk to the world. Do Twitter updates automatically, serve web pages, connect to web services, display sensor data online, and control devices using a web browser.

The Freetronics EtherTen uses the same ATmega328P as the Duemilanove and the same Wiznet W5100 chip used by the official Arduino Ethernet Shield, so it's 100% compatible with the Ethernet library and sketches. Any project you would previously have built with an Arduino and an Ethernet shield stacked together, you can now do all in a single, integrated board.

We've even added a micro SD card slot so you can store web content on the card, or log data to it.

Features

  • Gold Plated PCB
  • Top and bottom parts overlays
  • Top-spec ATmega328P MCU
  • Mini-USB connector
  • D13 Pin isolated with a mosfet so you can use it as an input
  • Power-over-Ethernet support
  • Ethernet activity indicators on the PCB and the jack
  • 10/100 base-T auto-selection
  • Fully compatable with standard Ethernet library
  • Reset management chip
  • Fixed SPI behaviour on Ethernet chipset
  • Robust power filtering

Specifications

MCU Type

Atmel ATMega328P

Operating Voltage

5v

MCU Clock Speed

16MHz

Input Voltage

7-12V DC Recommended

Input Voltage

6-20V DC Maximum

Digital I/O Pins

14 (6 provide PWM output)

Analog Input Pins

8 (analog input pins also support digital I/O, giving 22 digital I/O total if required)

Analog Resolution

10 bits, 0-1023 at 5V AREF is approx 0.00488V; 4.88mV per step

Current Per I/O Pin

40 mA maximum

Total Current For All I/O Pins

200mA maximum

Current For 3.3V Output

50mA maximum

Flash Memory

32 KB Flash Memory, of which less than 1 KB is used by bootloader

SRAM, EEPROM

2 KB SRAM, 1 KB EEPROM

micorSD

microSD card slot with SPI interface. Uses pins D4, D11, D12, D13

Serial

1x hardware USart, SPI Serial Peripheral Interface, 12C

Ethernet

1x 10/100 LAN port using the Wiznet W5100. Uses pins D10, D11, D12, D13

Other

Integrate USB programming and communication port. Many other one-wire, multi-wire, LCD and expansion devices supported by free code and libraries.

Resources

You Might Also Like

All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.

Out of Stock

EtherTen by Freetronics

ARD4216

$69.95

QTYPrice
1 $69.95
5 $62.95

We use cookies to ensure you have the best experience on our site. If you continue to use this site you consent to the use of these cookies. OK

Find out more in our Privacy Policy