10Amp Solar Regulator Water Resistant 12/24 Volt
A 12V-24V 10amp IP67 Solar Regulator with built-in timer function. This unit will charge both wet-cell and sealed lead-acid batteries and uses Pulse Width Modulation for optimal charging.
Recommended for charging 12V batteries.
- Intelligent timer function
- Ideal for extreme environments
- High efficient PWM charging
- Automatically recognises day/night
- LED indicators for PV and battery status
- Industrial design, wide application range
- Intelligent timer function with 1 to 13 hours of operation
- IP67 protection
- PV reverse polarity protection
- Battery overcharge, over discharge, reverse polarity and overheating protection
- Load overload and short circuit protection
Maximum PV Input Voltage
14.8V (12V); 29.6 (24V)
14.4V (12V); 28.8V (24V)
13.7V (12V); 27.4V (24V)
Low Voltage Reconnect Voltage
12.6V (12V); 25.2V (24V)
Low Voltage Disconnect Voltage
11.2V (12V); 22.4V (24V)
12V: ≤4.58mA 24V: ≤6.01mA
Temperature Compensation Coefficient
-35°C to 55°C
1 x 12/24 Volt 10Amp Solar Regulator Water Resistant
1 x User Manual
Mounting Hole Diameter (mm)
You Might Also Like
All prices are in Australian Dollars and include GST. GST will be removed from your order if you are ordering from outside Australia.
Products may differ from pictured.
All trademarks and trade names are the properties of their respective owners. Wiltronics disclaims any proprietary interest in trademarks and trade names other than its own.