Raspberry Pi 4 set to arrive in stock late August/early September
The Raspberry Pi micro computer has taken a big leap forward with the launch of the Raspberry Pi 4 Model B. The new model features a 1.5GHz quad-core 64-bit ARM Cortex-A72 CPU, dual monitor support at resolutions up to 4K and tiered memory options. Naturally this has resulted in high demand. After consultation with our supplier we are expecting the Raspberry Pi 4 Model B to arrive in stock between late August to early September. A more precise date will be determined as that window approaches.
Raspberry Pi 4 Model B Pricing
The Raspberry Pi 4 will feature 3 different versions with tiered RAM options: 1GB, 2GB, 4GB.
Raspberry Pi 4 Model B 1GB $64.95
Raspberry Pi 4 Model B 2GB $82.95
Raspberry Pi 4 Model B 4GB $99.95
A new range of accessories will become available with the introduction due of the Pi 4. If upgrading from a previous model Pi there are a few changes to be aware of.
- Power Connector: USB-C (previously USB micro-B)
- Video: A pair of type-D (micro) HDMI connectors (previously single type-A HDMI)
Cases for the Raspberry Pi 3 Model B+ and earlier will not be suitable for the 4. However rasberrypi.org has stated the official Raspberry Pi cases (RPi3023RASP, RPi3023BG) can be adapted to fit the 4 by cutting away the plastic fins on the right-hand side and omitting one of the side panels: Raspberry Pi 4 Launch post.
Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 4-bit SoC @ 1.5GHz
1GB, 2GB or 4GB LPDDR4-2400 SDRAM(depending on model)
2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
2 × USB 3.0 ports
2 × USB 2.0 ports.
Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
Video & Sound
2 × micro HDMI ports (up to 4Kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES, 3.0 graphics
SD Card Support
Micro SD card slot for loading operating system and data storage
5V DC via USB-C connector (minimum 3A)
5V DC via GPIO header (minimum 3A)
Power over Ethernet (PoE)–enabled (requires separate PoE HAT)
Operating temperature 0–50ºC