Sunsine® Plus Features

A high-efficiency sine wave inverter, battery charger and power booster, which is microprocessor controlled. Incorporating Energy Management and System Management.

• Hybrid power systems which include an AC generator
• UPS-type power systems

• High-efficiency sine wave inverter
• Battery charger / conditioner
• Operates as a high-efficiency battery charger at the full rating of the inverter conditions batteries by boost / float operation using constant current, followed by constant voltage charging.
• Power Booster
• Syncronises and runs in parallel with generator
• Adds its power to that available from the generator
• Allows the use of smaller gensets
• Automatically adapts itself to generator size

• 1500VA (24V) & 2000VA (48V) inverter
• 1500VA (24V) & 2000VA (48V) battery charger
• low harmonic sine wave output
• DC circuit-breaker for isolation & protection
• AC output isolation circuit-breaker
• AC generator input circuit-breaker
• 1.5m battery leads
• automatic & manual start (load-search)
• no break when genset or grid switched on / off
• automatic genset control via on / off contact
• charging parameters switchable for gel (sealed) or flooded batteries
• LCD for data display and parameter setting
• manual genset start / stop / boost button
• meets AS3000 wiring standards
• low radio interference levels; meets AS1044
• excellent voltage regulation
• high surge and overload ratings
• fully protected against reverse polarity, overload, short-circuit, DC under & overvoltage
• reliable and rugged
• 2 year warranty
• designed and manufactured in Australia
• 50/60Hz AC output switch-selectable
• AC output voltage adjustable, 220 to 250V
• PCBs coated for environmental protection