Use it to produce Hydrogen and Oxygen from water using an external power source (solar or DC power). Gases are produced and stored using specially designed gas & water containers. Can be used to replace the Hoffman's voltmeter. It is sold with a small amount of gas tubing, a syringe and electrical lead. Input: 1.65V, 0.5A.
Dimensions:54mm x 54mm x 17mm Weight:67.7 grams
H2 Production: 5ml per minute O2 Production:2.5ml per minute
$54.00
KI9030
Reversible Fuel Cells
When applying an electrical current (Solar or DC power), the reversible fuel cell acts an electrolyzer that produces Hydrogen and Oxygen from water. When applying a load, the electrolyzer becomes a fuel cell and generates electricity from hydrogen. The 180mW module has a maximum rated output of .6V @ 300ma.
$60.00
KI9040
Open Cathode H2/O Fuel Cell
Converts H2 and Oxygen from the Air into electricity and water. It can be integrated into small applications using a small hydrogen storage module as the fuel source. Use this in combination with the KI9020.
$48.00
KI9050
Water & Gas Storage Vessels
Complete with measuring labels you will receive two gas containers and two water containers. Water: 60cc Gas: 16cc
$11.50
KI9055
Purging Syringe
$5.50
KI9060
Flexible Tubing and Stopper Kit
$5.75
KI9065-10
10cm 2mm Banana Plug Lead Pair
$7.00
KI9065-150
150cm 2mm Banana Plug Lead Pair
$9.50
KI9065-30
30cm 2mm Banana Plug Lead Pair
$8.00
KI9070-150
150cm 2mm Banana Plug/Croc Lead Pair
$7.00
KI9070-30
30cm 2mm Banana Plug/Croc Lead Pair
$6.00
KI9201
TDM Flex Stack Cell - 1 Cell
Graphite composite bipolar/monopolar plates, plastic end plates, High
performance PEM (Proton Exchange Membranes) and an expandable design.
1 to 1.5 Watts - 10.6 CC/MIN
$225.00
KI9205
TDM Flex Stack Cell - 5 Cell
Graphite composite bipolar/monopolar plates, plastic end plates, High
performance PEM (Proton Exchange Membranes) and an expandable design.
5 to 7.5 Watts - 53 CC/MIN
$490.00
KI9210
TDM Flex Stack Cell - 10 Cell
Graphite composite bipolar/monopolar plates, plastic end plates, High
performance PEM (Proton Exchange Membranes) and an expandable design.
10 to 15 Watts - 106 CC/MIN
$915.00
KI9215
TDM Flex Stack Cell - 15 Cell
Graphite composite bipolar/monopolar plates, plastic end plates, High
performance PEM (Proton Exchange Membranes) and an expandable design.
15 to 22.5 Watts - 162 CC/MIN
$1,320.00
KI9220
TDM Flex Stack Cell - 20 Cell
Graphite composite bipolar/monopolar plates, plastic end plates, High
performance PEM (Proton Exchange Membranes) and an expandable design.3
20 to 30 Watts - 212 CC/MIN
$1,595.00
KI9250
Male 1/8" Pipe Thread Connector
$15.20
KI9251
Replacement O rings x 10pcs
$1.20
KI9253
1/8" Y Connector
For joining multiple 1/8" black tubes together
$7.62
KI9255
Pressure Regulator
This 10/32 Thread Pressure Regulator will fine adjust 0-20 PSI of pressure.
$48.66
KI9265
Hydrogen Purge Valve
For purging hydrogen from the system
$29.90
KI9270
Pressure Gauge 1"
This is a 1" dial pressure gauge that has a range of 0-30 PSIG
$21.85
KI9275
Male 1/8" Tube to Thread Adaptor
1/8" black tube female connector connects to 10/32 thread
