Home
HOME CATALOGUE MANUFACTURING MANUFACTURED PRODUCTS ABOUT US
Water Bath & Controller

Pictured is WaterBath complete with Controller sitting atop an IEC Hotplate

The Bath is designed rest fit over any of the IEC Hotplates

Image Code DescriptionEachQuantity
LQ4240-001IEC WATER BATH

A useful Water Bath that is heated by a Hot Plate. Two test tube stands can fit so biological work is low cost and convenient. The end feet of the bath slide down to rest on the work bench for a stable support but also slide up to provide the smallest size for storage. A Thermostat Control LQ4240-101 can be fitted to the edge of the bath to control the Hot Plate so the water temperature can be held constant. This control is purchased separately.

For an approximate temperature control, the careful adjustment of the heat regulator of the Hot Plate can keep the water bath reasonably steady but not as regulated and accurate as the Thermostat unit.

 

$190.30 
LQ4240-101IEC WATER BATH CONTROLLER

For accurate or unattended work the IEC Temperature Controller LQ4240-101 can be slid over the front edge of the water bath to install a temperature sensor at the bottom of the bath. The controller plugs into mains power and the Hot Plate plugs into the socket from the controller. The plate is then controlled and cycles on and off to maintain an accuracy of about plus/minus 3degrees Celsius. (Picture shows the controller fitted to the waterbath sitting on an IEC Hotplate)

 

$176.00